Abus-technologies RS485-USB Converter Manual do Utilizador Página 4

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 11
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 3
ABUS TECHNOLOGIES INC.
4
RS485-USB
1. INTRODUCTION
The RS485-USB module is a cost-effective way to convert RS485 or RS422
industrial buses to a USB interface. When connected to a PC USB port the RS485-
USB module is automatically detected and is installed as a native COM port, which is
compatible with any existing serial communication application.
Multiple modules can be installed when using USB hubs thus allowing a hassle-
free configuration of a multi serial system without any IRQ or DMA configuration. 1500
Vdc isolation between the USB port and RS485/RS422 protects the PC from spikes or
possible misconnections in the communication bus.
2. PRESENTATION
Technical Parameters
The RS485-USB converter can be configured for four-wire (Full Duplex) RS422 and RS485 or
two-wire (Half Duplex) networks. When operating in two-wire RS485 the data transfer control is
automatically done by the converter. Two independent and isolated RS485 networks can be supported
by one RS485-USB module thus duplicating the possible number of remote devices.
Computer interface: USB V1.1 Plug and Play.
Operational system virtual serial port driver. Supports Windows 98/ME/XP/2000/CE, MAC &
Linux 2.4.20 or superior.
Field Interfaces: RS485 Half Duplex (dual buses), RS485 Full Duplex or
RS422.
Jumper selected: RS485 / RS422.
Automatic flow control for RS485 Half Duplex.
120 Ohms internal resistors termination enabled by jumpers.
Data rate: From 300 bps to 1 Mbps.
Maximum RS485/RS422 cable length: 1200 m
Maximum number of devices in the RS485 network (unit load devices – 12 k):
Half Duplex: 2 x 32 devices
Full Duplex: 32 devices
Data transmission and reception LED indicators
Power: From the USB port. Consumption: <100 mA.
Isolation: 1500 Vdc (1 minute) from USB interface and the
RS485/RS422 interface.
RS485/422 bus protection: ±60 Vdc, 15 kV ESD.
USB connection: Mini-B connector. A 1.5 m cable with plugs mini-B and A is
provided with the module.
RS485/422 connector: Screw terminal type accepting 1.5 mm² (16 AWG) wires.
Operating environment: 0 to 50°C, 10 to 90% relative humidity, non-condensing.
ABS enclosure: 70 x 60 x 18 mm.
Vista de página 3
1 2 3 4 5 6 7 8 9 10 11

Comentários a estes Manuais

Sem comentários